Blog
Home /

Blog

  • The Key Components Of Turbo Apr , 22 2019
    Maybe you have ever heard about turbo( turbocharger), and also know some basic situations about it. But do you know about the internal component of turbo? If not, this article will help you to understand it much better. The key components of turbo includes the turbine, the compressor and the hub rotating assembly three main parts. And of course many turbocharger installations use additional techno...
    Read More
  • What is a T3/T4/T6 Turbine Housing? Aug , 12 2019
    You have probably heard people talking about their cars with T3, T4 and T6 turbos. Then do you exactly know what is a T3, T4 and T6 turbo, and what are the differences between them? Let us give you a explanation here. The T3/T4/T6 refers to the tubro turbine housing size and increase in diameter and width as the number goes up. So a T4 turbine will be larger than a T3 turbine h...
    Read More
  • GTX Series Turbocharger for performance | Refoneturbo.com Dec , 31 2021
    GTX Series turbochargers are designed specifically for optimal performance. The light weight design CNC machined billet compressor wheel feature next generation aerodynamics that provides a larger horsepower range and maximiser boost response. The ported shroud compressor housings increase surge resistance,to provide reliable and continuous power throughout the power band. Each model Turbos have 2...
    Read More
  • Refone Casting materials for the turbine housing Mar , 08 2022
    The life of a turbocharger can be affected by such factors as thermal cracking, fatigue and/or creep.The requirements for these highly stressed casting components rise as the unit size and performance capability increase. The turbine housing is of key importance here, as it is placed under extremely high thermal stress and is also the most expensive component due to its size, complexity and materi...
    Read More
  • The Features of Turbocharger-- Turbo Model Mar , 23 2022
    The turbo model says a great deal about the features of your turbocharger. Do you know how to ensure you identify which model is fitted to your vehicle? Checking our guide that explaining the nameplate characters. Garrett T Series Turbo model T04B: T04 = frame size (74.2mm turbine) B = the design BB    Ball Baring CT    Ceramic Turbi...
    Read More
  • Why did your Turbochger fail? Apr , 26 2022
    When a turbocharger fails, first and foremost, you need to diagnose the cause of the problem. Signs of a failed turbocharger include loss of power, smoke, high fuel consumption, turbo overheating and oil leaks. If you hear a whistling sound from the turbo, there are three possible internal causes: 1: This could be due to air/gas spills due to pre-turbine gas or air leaks. You need to check th...
    Read More
  • Why is piston ring gap important in the Turbocharger? Jun , 24 2022
    These piston rings in turbocharger are designed to reduce oil blow by of the turbine (rear) seal and can withstand extreme temperatures caused by your turbocharger. Because the ring material will expand as the temperature rises. If the gap is too small, the ends of the ring may collide which can lead to the ring breaking, scoring the bore, and eventually lead to complete breakdown. On the contrary...
    Read More
  • Instructions on How to Measure Turbocharger Wheels Aug , 08 2022
    Wheel diameter measurement is essential when replacing or upgrading a turbocharger.However, measuring wheel diameter is not as simple as pulling out a tape measure or caliper. You need to measure data at different points, such as inducers (incoming), exducer (outgoing). At the same time, you should also pay attention to the measurement method of the different number of blades. The measurement tool...
    Read More
  • The Role of Turbocharger parts-Including Refone Code rules Aug , 29 2022
    Turbine Housing-7001 It collects Exhaust gasses from an engine and directs it through a volute (passage) which drives the shaft wheel assembly of a turbo causing it to spin Compressor Housing-7002 It  clean air is collected and compressed before being forced into the engine Actuator-7003 It acts as a pressure relief valve that controls the boost output of your turbo, diverting excess exhaust ...
    Read More
  • Components of a turbocharger Feb , 02 2023
    The turbocharger consists of several main parts, which are the housing (including the turbine housing and compressor housing), rotor (including the shaft wheel and compressor wheel. Exhaust gas to push the shaft wheel to generate power, the turbine drives the compressor wheel to compress air), bearing housing (internal lubricating oil channels and bearings, responsible for heat dissipation and red...
    Read More
  • Turbocharger castings Feb , 14 2023
    Turbocharger castings for high performance engines require materials that are compatible with the behavior of the components, especially when there is a need to reduce exhaust emissions and improve engine performance. As product size and performance capabilities increase, so do the demands on these highly stressed castings. A turbocharger basically consists of two main components. The turbine whee...
    Read More
  • How is the turbocharger of a car cooled and lubricated? Feb , 21 2023
    The turbocharger on the car is working to withstand the impact of high temperature and high pressure exhaust gas from the engine, and the turbo's speed is generally above tens of thousands of revolutions, up to 200,000 revolutions / min, and the temperature is also as high as 900 to 1000 ℃. In such a high working temperature and speed, how is the turbocharger lubrication and cooling it? Turbocharg...
    Read More
First 1 2 >> Last
[  A total of  2 pages  ]
 
Chat now Get Free Inquiry Now
We will contact you as soon as possible!